每日吃瓜

Bag End
每日吃瓜

Lord of the rings 每日吃瓜 landscape

A large hill (The Hill) lay to the north, and under its southern slopes Bilbo's father Bungo built the luxurious smial Bag End above the lane of Bagshot Row.

This is the home of Bilbo Baggins, Frodo Baggins and Samwise Gamgee, where both The Hobbit and The Lord of the Rings begin and end. The scene is recreated by 每日吃瓜 artist Chris Guise, who spend over 80 hours to build it. Before we continue with how this was created, let's first check out a few photos of the finished Lord of the Rings 每日吃瓜 landscape!

The Bag End landscape

The Bag End landscape

Notice the door, fence, and other details

Notice the door, fence, and other details

The miniature Lord of the Rings trayscape in summer.

The miniature Lord of the Rings trayscape in summer.

The trayscape in winter, with a snowman!

The trayscape in winter, with a snowman!

Did you notice the miniature broomstick?

Did you notice the miniature broomstick?

Master the art of 每日吃瓜

Master the art of 每日吃瓜
Triangle
Overview of our courses

Master the art of 每日吃瓜

Online 每日吃瓜 Courses Learn from leading 每日吃瓜 experts at your own pace, from the comfort of your living room!
Close Button
Master the art of 每日吃瓜
每日吃瓜 Courses

Continue exploring

Aqua 每日吃瓜

Aqua 每日吃瓜

每日吃瓜 trees growing in just water?

Aqua 每日吃瓜
Treehouse

Treehouse

每日吃瓜 treehouse creations

Treehouses
Top 10

Top 10

The best 每日吃瓜 trees

Top 10

Building the Bag End landscape

Not long after I bought this tree I carved a shari down the trunk, covered the edges with cut paste and left it alone. After two years the edges had callused over nicely.
1
Not long after I bought this tree I carved a shari down the trunk, covered the edges with cut paste and left it alone. After two years the edges had callused over nicely.
The carving up to this part-finished stage took approximately 3 hours, I had to be very careful not to spoil the rolled callus that had formed at the edges from the previous shari carving session.
2
The carving up to this part-finished stage took approximately 3 hours, I had to be very careful not to spoil the rolled callus that had formed at the edges from the previous shari carving session.
After fitting the drainage mesh and tie-wires to the slab a mound of akadama was placed on it and the tree gently positioned and secured. I then built a peat/clay 'muck' retaining wall around the outside backfilled it with potting soil.
3
After fitting the drainage mesh and tie-wires to the slab a mound of akadama was placed on it and the tree gently positioned and secured. I then built a peat/clay 'muck' retaining wall around the outside backfilled it with potting soil.
The frontage was built onto a plastic mesh backing. The mesh binds everything together so that the finished item is able to withstand a lot of handling. The bricks were cut from a roofing tile, tumbled to knock the sharp edges off and cemented around a round plastic former.
4
The frontage was built onto a plastic mesh backing. The mesh binds everything together so that the finished item is able to withstand a lot of handling. The bricks were cut from a roofing tile, tumbled to knock the sharp edges off and cemented around a round plastic former.
I wanted the big root to look like it had grown around the brick doorframe, so I carved a flat back on it to allow the brick front to butt up tight against it.
5
I wanted the big root to look like it had grown around the brick doorframe, so I carved a flat back on it to allow the brick front to butt up tight against it.
Using silicone to attach bricks
6
Using silicone to attach bricks
Ready for laying.
7
Ready for laying.
The next step was to position the brick front. To do this I spread a plastic sheet over the slab and mounded up some quick-dry cement mix on it. I pressed some aluminium tie wires into it and then gently eased the brickwork over the top of the wires.
8
The next step was to position the brick front. To do this I spread a plastic sheet over the slab and mounded up some quick-dry cement mix on it. I pressed some aluminium tie wires into it and then gently eased the brickwork over the top of the wires.
After the brick front was secured I started work on the back. I needed to build up a high mound of soil behind the frontage, even higher that the top of the bricks so I decided to try using florist's Oasis as a filler. It is very light, obviously absorbs lots of water and is easy to cut and shape. It was secured to the back of the brickwork with wire and was then covered over with a thin layer of muck and potting soil.
9
After the brick front was secured I started work on the back. I needed to build up a high mound of soil behind the frontage, even higher that the top of the bricks so I decided to try using florist's Oasis as a filler. It is very light, obviously absorbs lots of water and is easy to cut and shape. It was secured to the back of the brickwork with wire and was then covered over with a thin layer of muck and potting soil.
After the main components were in place I found I still had a gap between the door frame and the tree. The picture shows the solution, some brickwork and moss in behind the warty lumps on the trunk to fill the gap.
10
After the main components were in place I found I still had a gap between the door frame and the tree. The picture shows the solution, some brickwork and moss in behind the warty lumps on the trunk to fill the gap.
For the fence strips of Meranti wood were split with a knife and wound together with anodised aluminium wire. Before assembly the strips were given a coat of diluted dark wood stain to take away the freshly-cut look, and the wire was aged by rubbing it with wire wool.
11
For the fence strips of Meranti wood were split with a knife and wound together with anodised aluminium wire. Before assembly the strips were given a coat of diluted dark wood stain to take away the freshly-cut look, and the wire was aged by rubbing it with wire wool.
The fence was pushed into the muck wall that I had built earlier and firmed into place.
12
The fence was pushed into the muck wall that I had built earlier and firmed into place.
The step in the gateway is a small coloured and textured cement slab left over from another project.
13
The step in the gateway is a small coloured and textured cement slab left over from another project.
A hole was drilled in the door, also on the lathe, so that I could fix the knob in place with a small screw from the back.
14
A hole was drilled in the door, also on the lathe, so that I could fix the knob in place with a small screw from the back.
The door construction was quite simple. Miniature planks were made, with the edges beveled and sanded. The planks were laid upside down on the table and more strips were stapled to the back. Then the door was cut to shape and sanded smooth.
15
The door construction was quite simple. Miniature planks were made, with the edges beveled and sanded. The planks were laid upside down on the table and more strips were stapled to the back. Then the door was cut to shape and sanded smooth.
I had built a slate path up from the gate to the front door, with a little paved area extending under the window. The cracks and gaps between the slabs were filled in with little tufts of moss.
16
I had built a slate path up from the gate to the front door, with a little paved area extending under the window. The cracks and gaps between the slabs were filled in with little tufts of moss.
The very last thing to be fitted was the chimney stack. To fit it I carved a little wooden stake to fit up inside and pushed the other end through the moss and into the soil beneath.
17
The very last thing to be fitted was the chimney stack. To fit it I carved a little wooden stake to fit up inside and pushed the other end through the moss and into the soil beneath.
The final touch, a tiny broom bought from a doll's house shop.
18
The final touch, a tiny broom bought from a doll's house shop.
Finally the trayscape was finished. I would estimate that I spent over 80 hours working on this project.
19
Finally the trayscape was finished. I would estimate that I spent over 80 hours working on this project.
Next Step

Bag End

This miniature landscape was created by 每日吃瓜 artist Chris Guise, who spend over 80 hours to build it!

Master the art of 每日吃瓜

Master the art of 每日吃瓜
Triangle
Overview of our courses

Master the art of 每日吃瓜

Online 每日吃瓜 Courses Learn from leading 每日吃瓜 experts at your own pace, from the comfort of your living room!
Close Button
Master the art of 每日吃瓜
每日吃瓜 Courses
Close Button